Upload any image to be printed on your custom diy kitchen glass splashback.
Our printed diy kitchen glass splashbacks are made from 6mm toughened opti clear glass, and are polished on all edges.
Adding Clear shield to your order will provide you with a 6K surface protection system specifically designed to protect glass using Nano technology to provide a hydrophobic, water repelling coating. The hydro- and oleo phobic effects makes it difficult for particles of contamination such as grease and dirt to adhere and allows them to be easily removed without applying abrasive agents giving an 'easy-clean' effect.
Sizing: All toughened glass has a 1-2mm tolerance on the sizes. As the glass is toughened it is heated and cooled repeatedly. This causes the glass to expand and contract slightly during the process and can effect the overall measure on width or height - thus the tolerance/expansion gap guide.
Drill Holes: If ordered with drill holes the will be placed 25mm in from each edge, unless stated otherwise.
Adhesive If using adhesive, we recommend that you purchase with the order as some others can react with the paint/print on the back of the splashback.
Customer Reviews 1 item(s)
- Own image splashback fantastic
- I uploaded my image and it was resized and sent back by email for approval. The order has arrived and the print is fantastic, we were surprised at the quality of the product image is crisp and colours are great - fantastic & everyone loves it!
*We offer discounted delivery on most orders going to Mainland UK, Northern Ireland and Ireland.
However the following orders are exempt and will incur additional delivery charge: Deliveries going to Scottish Highlands and Offshore Islands. Delivery of larger panels that are either over 20kgs in weight or have one dimension exceeding 1300mm. As a guide 1m2 weighs approximately 15kg.
If an order is placed online matching one of the above exemptions we will be in touch to inform you of the additional delivery charge. Alternatively, please give us a call on 0800 6124505 or email firstname.lastname@example.org and we can quote prior to ordering.
Orders from Splashbacks UK are on a supply only basis, there are simple steps to follow for DIY measuring and fitting in our Tutorials section.
Fitting: Please note that our coloured and printed glass splashbacks should be adhered with our recommended neutral cure silicone sealant. Other sealants may cause a reaction with the print/paint.