Our Satin Brushed Glass splashbacks are made from 6mm toughened frosted glass which is back painted to your colour choice. They are polished on all edges and fully opaque once fitted to the wall. When finished, the glass has a smooth silky touch and a velvety appearance. This glass range gives minimal or no reflection. However, due to the iron content in the glass it will alter the shade of your paint colour. Light colours will be considerably altered and deep darker colours just a little.
Please note that there may be small white/light marks throughout the satin due to the manufacturing process, and although subtle, in darker colours like blacks and dark greys they might be noticeable.
Adding Clear shield to your order will provide you with a 6K surface protection system specifically designed to protect glass using Nano technology to provide a hydrophobic, water repelling coating. The hydro- and oleo phobic effects makes it difficult for particles of contamination such as grease and dirt to adhere and allows them to be easily removed without applying abrasive agents giving an 'easy-clean' effect.
We can match any colour you wish, from any paint range - Dulux, Colortrend, Farrow & Ball, Crown Paints, Laura Ashley, RAL Colours and many more.
Sizing: All toughened glass has a 1-2mm tolerance on the sizes. As the glass is toughened it is heated and cooled repeatedly. This causes the glass to expand and contract slightly during the process and can effect the overall measure on width or height - thus the tolerance/expansion gap guide.
Drill Holes: If ordered with drill holes the will be placed 25mm in from each edge, unless stated otherwise.
Adhesive If using adhesive, we recommend that you purchase with the order as some others can react with the paint/print on the back of the splashback.
You may also be interested in the following product(s)
*We offer discounted delivery on most orders going to Mainland UK, Northern Ireland and Ireland.
However the following orders are exempt and will incur additional delivery charge: Deliveries going to Scottish Highlands and Offshore Islands. Delivery of larger panels that are either over 20kgs in weight or have one dimension exceeding 1300mm. As a guide 1m2 weighs approximately 15kg.
If an order is placed online matching one of the above exemptions we will be in touch to inform you of the additional delivery charge. Alternatively, please give us a call on 0800 6124505 or email firstname.lastname@example.org and we can quote prior to ordering.
Orders from Splashbacks UK are on a supply only basis, there are simple steps to follow for DIY measuring and fitting in our Tutorials section.
Fitting: Please note that our coloured and printed glass splashbacks should be adhered with our recommended neutral cure silicone sealant. Other sealants may cause a reaction with the print/paint.